What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 22.06.2025 08:22
He then asserts :
Can the fuse protect the electronic devices from lightning instead of a surge protector.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Have you ever accidentally found out that you were about to be fired?
What does a fuse do?
nine
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
a photo is worth a thousand words.
Because the load is inductive, the current lags the voltage.(by a bit).
An AC voltage/ current source, and an ac inductive load.
Judge extends order suspending Trump’s block on Harvard’s incoming foreign students - CNN
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This one hit behind the barn.
He then describes the function of a fuse.
Scottie Scheffler's Wife Meredith Scheffler Gets Strong Message From PGA Tour Golfer - Athlon Sports
There are three different concepts here that are getting confused.
[image of Common-mode choke]
The MOV will conduct when the voltage exceeds 50% of line voltage.
How to watch Apple’s WWDC 2025 keynote - TechCrunch
but this device (an Inductor) … impedes the rapid changes in the current.
These devices are installed between the “hot” and “neutral” and protective ground.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
NASA Spots Strange Towering Shape Breaking Through Mars’ Atmosphere - The Daily Galaxy
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This device then solves the entire problem.
2024–10–16 [ OO OLAOYE OYEBODE ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
He then describes Rainy Season and Lightning.
A fuse is a non-resetable over current circuit protector.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Elden Ring Nightreign devs confirm they’re working on a duos mode - Polygon
The third is lightning and “how it gets conducted into a home.”
eight
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
A new COVID variant is spreading across California. Could we see a summer surge? - Sacramento Bee
What is lightning?
The bolt then partially travels down the line to your home.
Upvotes:
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
What would you do if you found out that someone had broken into your home while you were sleeping?
But it can get overloaded, and no longer works.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
(Dc diagram shown, AC is similar).
In schematic diagrams this is the symbol for a fuse:
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
At least they know the answer if they wanted it.
But… the neutral is now “floating” because of the 1 ohm resistance.
There are two important concepts here.
A circuit breaker is similar, but is resettable.
These are simplified answers to the original question, and does not change anything I wrote above.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–10[John johnson John Johnson ]
One is “what exactly is in a ‘surge protector’ ? ”
what exactly is a ‘surge’ protector?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
but I think this circuit , shows a few more pieces.
Edit 2024–10.
I post the exact comment here.
The other is “what does a “fuse” do?”
Now when you have a certain ac resistance, then a current flows in a loop.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
First Sentence:
This is 'the assistant's answer'
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
One
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
the problem then depends on "how fast does the fuse operate?".
Barnstars:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
[old diagram got deleted by accident]
It seems Mohan does not understand the difference between a comment and an Answer.
Here is a simplified AC power diagram.
For this case there are devices called Metal oxide varistors (MOV).
It also is a device that limits the change in current flow.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
so, what happens?
At one ohm, the resistor has a maximum of 1 watt power.
This is where the MOV conducts again, and dissipated the energy.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is where this question deviates from being a 'generic' question, and becomes more specific.